Two Tahitian pearls, stacked and held loose inside a hand-fabricated open cage — soldered into shape at the top, left open at the base so the pearls stay visible from every angle. A single wire threads through both pearls and up into the fold of the cage, forming the bail. Sterling silver 2.5mm rolo chain adjustable from 20” tp 22”
Thirteen forged sterling circles, each shaped by hand on a wooden dowel and set along a fine rolo chain, let the necklace close wherever you want it to. The forged S-clasp fastens to any circle in the run — worn long, doubled, or anywhere in between, the clasp riding in front as part of the design rather than hidden at the back. Every other circle carries a hammered pattern, the worked and the smooth alternating down the length so the light catches in a measured rhythm.
A wide hammered circle of 12 gauge wire holds a dapped and textured sterling disc suspended at its center, hung from a soldered C-hook so the dome sits inside the ring without touching it. The disc is worked from 28 gauge sheet, its surface drawn into fine parallel lines that read almost like water. A half-round bail carries the whole thing.
Three hand-forged halos climb in ascending size along one side, each formed from 12-gauge sterling and hammered so the surface catches light around its full curve. I let the halos gather off-center, weighted toward one shoulder rather than centered — the asymmetry is what gives the piece its movement. A fine oval-link chain carries the rest.
Sterling silver throughout, including hand-forged halos. Oval-link chain. Approximately 18 inches.
Two hammered marquise frames attached to each end of the rolo chain create a cascading line down the chest. Each frame is formed and soldered by hand, then textured and softly bent so the silver catches light along every edge. The chain passes through the upper marquise and falls freely, the second frame moving with the wearer.
Sterling silver throughout. 24" rolo chain. Marquise frames approximately 2.75" each.
Five hammered sterling ovals, each formed and soldered by hand, hang in a stepped cascade — identical in size, offset in position, the center oval dropping lowest. The pendant hangs from a long oval-and-circle link chain that echoes the open geometry of the piece.
Sterling silver throughout. Total length 18 inches.
No results match your search. Try removing a few filters.
